| _application | /conversions/M1010080A2230_PICTO.JPG |
|---|---|
| _icon | nutfraesen.jpg; trennfraesen.jpg |
| _download | /documents/M1010125A3240.DXF; /documents/M1010125A3240_20230114_043154239.STP |
| _drawing | /conversions/M101_AX_20161108_115150689.JPG |
| _main_image | /conversions/none |
| bore diameter met | 45 |
| Cutting diameter (Ds) | 125 |
| Cutting width minimum (b1) | 3.8 |
| DIN_CCTWS | HORN-101400058N |
| DIN_CCTMS | FDA03202200 |
| Diameter of the mandrel (dK) | 55 |
| Diameter facing system for disk cutters (d2) | 32 |
| ISO-CCTWS | HORN101400058N$$$$$ |
| ISO-CCTMS | FDA22G3200$$$$ |
| Katalog-CCTWS | 10140 |
| Number of teeth (Z) | 10 |
| Miller length with indexable insert (hmax) | 50.9 |
| Mounting hole depth (l1) | 25 |
| Length from stop to center insert (l4) | 36.7 |
| Maximum milling depth/ depth of groove (w) | 34 |
| productnr-sap | M1010125A3240 |
| Plating seat size (Größe) | 40 |
| Number of revolutions maximum (nmax) | 4000 |
| Wide disc cutter without cutting insert (b) | 3.2 |
Write Your Own Review