| _application | /conversions/DCG4M61003106_PICTO.JPG |
|---|---|
| _icon | gewinde_metrisch.jpg; gewinde_teilprofil.jpg; zaehnezahl_z3.jpg |
| _download | /documents/DCG3M40703106_20210625_211500431.DXF; /documents/DCG3M40703106_20210630_113348926.STP |
| _drawing | /conversions/DCGTP_20170622_165054655.JPG |
| Cutting diameter (d1) | 2.8 |
| DIN_CCTMS | ZYL00600105 |
| ISO-CCTMS | ZYL01F6000h$06 |
| Number of teeth (Z) | 3 |
| Maximum pitch (Pmax) | 0.75 |
| productnr-sap | DCG3M40703106AN25 |
| Total length (l1) | 50 |
| Pitch (P) | 0.7 |
| Shank diameter (d2) | 6 |
| Neck length (l3) | 10 |
| Shank, clamping length (l1) | 36 |
| Neck diameter (d3) | 1.7 |
| Smallest bore diameter (Da min) | 3.3 |
| Thread (Gewinde) | M4 |
Write Your Own Review